raspberry-pi – Tarik Billa

transmission-remote commands are erroring with Unexpected response: 401: UnauthorizedUnauthorized User: deflate, gzip

December 21, 2023 by Tarik

It happened the same thing with me, what I did: First off, remove all transmission in your distro; apt-get remove transmission-daemon Second, obvious, install again transmission, but You need to install transmission-daemon tand the packages like transmission-remote, that’s what you will use. apt-get install transmission-daemon Stop the process: /etc/init.d/transmission-daemon stop Desactived the AUTH: nano /etc/transmission-daemon/settings.json … Read more

Can RaspberryPi with BLE Dongle detect iBeacons?

August 14, 2023 by Tarik

Yes! You can use your Raspberry Pi to scan for iBeacons. We’ve put together a script below that does this, you can also do it yourself with these steps: Start a background process that does a bluetooth LE scan: sudo hcitool lescan –duplicates & With the –duplicates setting the scan will not ignore multiple packets … Read more

Raspberry Pi SSH Access Denied

August 13, 2023 by Tarik

Recently, the default user setup of Raspbian was significantly changed, rendering most existing online tutorials invalid. In essence, the default pi user no longer exists, so you have to create it and set its password using either the official Imager tool or by creating a userconf file in the boot partition of your microSD card, … Read more

How to disable sleeping on Raspberry pi

July 22, 2023 by Tarik

I installed xscreensaver sudo apt-get install xscreensaver Once installed, go to Rpi’s desktop “Menu” (left top corner) Go to preference –> screensaver. You will see a screen saver main menu. In the mode drop-down menu, select “disable screensaver” then close the window. Reboot the Raspberry PI. It should work now.

hcitool lescan shows I/O error

April 28, 2023 by Tarik

That happens often really often to me. I’m developing with it and it just happens from time to time. I was also able to reproduce your error within 5 minutes 😉 I’m running bluez v.5.17. However i can run lescan more than one time without this error. hcitool lescan Set scan parameters failed: Input/output error … Read more

How to change screen resolution of Raspberry Pi [closed]

January 30, 2023 by Tarik

Just run the following simple command on Raspberry Pi 3 running Raspbian Jessie. run terminal and type sudo raspi-config Go to: >Advanced Option > Resolution > just set your resolution compatible fit with your screen. then reboot If you didn’t found the menu on configuration, please update your raspberry pi software configuration tool (raspi-config). That’s … Read more