From the FAQ:
How do I see a list of all of the ansible_ variables?
Ansible by default gathers “facts” about the machines under management, and these facts can be accessed in playbooks and in templates. To see a list of all of the facts that are available about a machine, you can run the
setupmodule as an ad hoc action:ansible -m setup hostnameThis will print out a dictionary of all of the facts that are available for that particular host. You might want to pipe the output to a pager.This does NOT include inventory variables or internal ‘magic’ variables. See the next question if you need more than just ‘facts’.
Here is the output for my vagrant virtual machine called scdev:
scdev | success >> {
"ansible_facts": {
"ansible_all_ipv4_addresses": [
"10.0.2.15",
"192.168.10.10"
],
"ansible_all_ipv6_addresses": [
"fe80::a00:27ff:fe12:9698",
"fe80::a00:27ff:fe74:1330"
],
"ansible_architecture": "i386",
"ansible_bios_date": "12/01/2006",
"ansible_bios_version": "VirtualBox",
"ansible_cmdline": {
"BOOT_IMAGE": "/vmlinuz-3.2.0-23-generic-pae",
"quiet": true,
"ro": true,
"root": "/dev/mapper/precise32-root"
},
"ansible_date_time": {
"date": "2013-09-17",
"day": "17",
"epoch": "1379378304",
"hour": "00",
"iso8601": "2013-09-17T00:38:24Z",
"iso8601_micro": "2013-09-17T00:38:24.425092Z",
"minute": "38",
"month": "09",
"second": "24",
"time": "00:38:24",
"tz": "UTC",
"year": "2013"
},
"ansible_default_ipv4": {
"address": "10.0.2.15",
"alias": "eth0",
"gateway": "10.0.2.2",
"interface": "eth0",
"macaddress": "08:00:27:12:96:98",
"mtu": 1500,
"netmask": "255.255.255.0",
"network": "10.0.2.0",
"type": "ether"
},
"ansible_default_ipv6": {},
"ansible_devices": {
"sda": {
"holders": [],
"host": "SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 02)",
"model": "VBOX HARDDISK",
"partitions": {
"sda1": {
"sectors": "497664",
"sectorsize": 512,
"size": "243.00 MB",
"start": "2048"
},
"sda2": {
"sectors": "2",
"sectorsize": 512,
"size": "1.00 KB",
"start": "501758"
},
},
"removable": "0",
"rotational": "1",
"scheduler_mode": "cfq",
"sectors": "167772160",
"sectorsize": "512",
"size": "80.00 GB",
"support_discard": "0",
"vendor": "ATA"
},
"sr0": {
"holders": [],
"host": "IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)",
"model": "CD-ROM",
"partitions": {},
"removable": "1",
"rotational": "1",
"scheduler_mode": "cfq",
"sectors": "2097151",
"sectorsize": "512",
"size": "1024.00 MB",
"support_discard": "0",
"vendor": "VBOX"
},
"sr1": {
"holders": [],
"host": "IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)",
"model": "CD-ROM",
"partitions": {},
"removable": "1",
"rotational": "1",
"scheduler_mode": "cfq",
"sectors": "2097151",
"sectorsize": "512",
"size": "1024.00 MB",
"support_discard": "0",
"vendor": "VBOX"
}
},
"ansible_distribution": "Ubuntu",
"ansible_distribution_release": "precise",
"ansible_distribution_version": "12.04",
"ansible_domain": "",
"ansible_eth0": {
"active": true,
"device": "eth0",
"ipv4": {
"address": "10.0.2.15",
"netmask": "255.255.255.0",
"network": "10.0.2.0"
},
"ipv6": [
{
"address": "fe80::a00:27ff:fe12:9698",
"prefix": "64",
"scope": "link"
}
],
"macaddress": "08:00:27:12:96:98",
"module": "e1000",
"mtu": 1500,
"type": "ether"
},
"ansible_eth1": {
"active": true,
"device": "eth1",
"ipv4": {
"address": "192.168.10.10",
"netmask": "255.255.255.0",
"network": "192.168.10.0"
},
"ipv6": [
{
"address": "fe80::a00:27ff:fe74:1330",
"prefix": "64",
"scope": "link"
}
],
"macaddress": "08:00:27:74:13:30",
"module": "e1000",
"mtu": 1500,
"type": "ether"
},
"ansible_form_factor": "Other",
"ansible_fqdn": "scdev",
"ansible_hostname": "scdev",
"ansible_interfaces": [
"lo",
"eth1",
"eth0"
],
"ansible_kernel": "3.2.0-23-generic-pae",
"ansible_lo": {
"active": true,
"device": "lo",
"ipv4": {
"address": "127.0.0.1",
"netmask": "255.0.0.0",
"network": "127.0.0.0"
},
"ipv6": [
{
"address": "::1",
"prefix": "128",
"scope": "host"
}
],
"mtu": 16436,
"type": "loopback"
},
"ansible_lsb": {
"codename": "precise",
"description": "Ubuntu 12.04 LTS",
"id": "Ubuntu",
"major_release": "12",
"release": "12.04"
},
"ansible_machine": "i686",
"ansible_memfree_mb": 23,
"ansible_memtotal_mb": 369,
"ansible_mounts": [
{
"device": "/dev/mapper/precise32-root",
"fstype": "ext4",
"mount": "/",
"options": "rw,errors=remount-ro",
"size_available": 77685088256,
"size_total": 84696281088
},
{
"device": "/dev/sda1",
"fstype": "ext2",
"mount": "/boot",
"options": "rw",
"size_available": 201044992,
"size_total": 238787584
},
{
"device": "/vagrant",
"fstype": "vboxsf",
"mount": "/vagrant",
"options": "uid=1000,gid=1000,rw",
"size_available": 42013151232,
"size_total": 484145360896
}
],
"ansible_os_family": "Debian",
"ansible_pkg_mgr": "apt",
"ansible_processor": [
"Pentium(R) Dual-Core CPU E5300 @ 2.60GHz"
],
"ansible_processor_cores": "NA",
"ansible_processor_count": 1,
"ansible_product_name": "VirtualBox",
"ansible_product_serial": "NA",
"ansible_product_uuid": "NA",
"ansible_product_version": "1.2",
"ansible_python_version": "2.7.3",
"ansible_selinux": false,
"ansible_swapfree_mb": 766,
"ansible_swaptotal_mb": 767,
"ansible_system": "Linux",
"ansible_system_vendor": "innotek GmbH",
"ansible_user_id": "neves",
"ansible_userspace_architecture": "i386",
"ansible_userspace_bits": "32",
"ansible_virtualization_role": "guest",
"ansible_virtualization_type": "virtualbox"
},
"changed": false
}
The current documentation now has a complete chapter about Discovering variables: facts and magic variables.